Canon 3300 Series User Manual

Settings for Printing Received Documents
5-42
Setting and Storing Custom Fax Settings
5
Two-sided Printing of Received Documents
You can print received documents on both sides of the recording paper. This enables you to
save paper.
NOTE
• The default setting for two-sided printing is “Off.”
1 Call up the desired screen as follows:
2 Select “On,” and press “OK.”
If you do not want to make two-sided prints, press “Off.”
NOTE
• To cancel the setting procedure, press “Cancel.”
3 Press “Done.”
The specified mode is set.
Press “Done” repeatedly until the Fax Basic Features screen appears.
(Additional
Functions)
Two-sided Print
Index.book Page 42 Thursday, May 24, 2001 12:30 AM

Canon 3300 Series Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Scanner Type	Flatbed
Scan Resolution	600 x 1200 dpi
Functions	Print, Scan, Copy
Print Speed (Color)	Approx. 4.0 ipm
Paper Capacity	60 sheets
Paper Sizes	A4, A5, B5, Letter, Legal, Envelopes (DL, COM10), Photo (4 x 6")