Using a Memory Box (Memory Box)
3-4
Special Fax Functions
3
Using a Memory Box (Memory Box)
Memory boxes are used to store scanned or received documents, and to print and transmit
the stored documents.
IMPORTANT
•
It is necessary to preset a memory box according to its use, then register the necessary items
including the password, subaddress, and RX password.
NOTE
•
To set each memory box, press (Additional Functions)
→
“Custom Fax Settings”
→
“File
Settings”
→
“Memory Box Store/Set” in this order. See ‘File Settings,’ on p. 5-44.
Scanning Originals into a Memory Box
If you use a Batch Sending Memory Box, the original is scanned and stored in the specified
memory box.
1
Place your originals, and make sure the machine is ready to send
press “Special Features” press “Memory Box.”
The Memory Box Select screen is displayed.
2
Press the memory box number you want to use.
Press "▲" or " ▼" if the memory box you want to select is not displayed.
Index.book Page 4 Thursday, May 24, 2001 12:30 AM
To Next Page
Loading...
Need help?
General
