Canon 3300 Series User Manual

Setting the Output of a Communication Report
7-3
Printing Communication Reports and Fax Function Settings
7
Setting the Output of a Communication Report
This machine can automatically output a receiving/sending results report and a memory box
receiving/sending report.
NOTE
• The Report Settings screen is made up of several screens. Use “ ▲ ” or “ ▼ ” to scroll to the desired
screen and make the required settings.
• When “ ▲ ” or “ ▼ ” should be pressed, the indication is displayed in this manual.
Setting Automatic Output of a TX Report
The TX report enables you to check whether or not the documents were sent correctly to the
intended destination. A sending result report can automatically be printed after documents
are sent. You can also set the machine to print a TX report only when a transmission error
occurs.
NOTE
• For an example of a Transmission report, see ‘Appendix,’ on p. 9-1.
• The default setting is “For Error Only.”
1 Call up the desired screen as follows:
(Additional
Functions)
(Custom Settings)
TX Report
Index.book Page 3 Thursday, May 24, 2001 12:30 AM

Canon 3300 Series Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Scanner Type	Flatbed
Scan Resolution	600 x 1200 dpi
Functions	Print, Scan, Copy
Print Speed (Color)	Approx. 4.0 ipm
Paper Capacity	60 sheets
Paper Sizes	A4, A5, B5, Letter, Legal, Envelopes (DL, COM10), Photo (4 x 6")