ComAp InteliCompact NT Reference Guide

InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
238
14
GSM modem did not accept particular initialization command, possibly caused by
locked SIM card
15
Unknown modem
16
Bad answer to complement initialization string
17
Not possible to read GSM signal strength
18
CDMA modem not detected
19
No CDMA network
20
Unsuccessful registration to CDMA network
255
Only running communication is needed to indicate
Value: AirGate Diag
Group
Controller I/O
Units
-
Related
applications
All
Description
Diagnostic code for AirGate connection. Helps in troubleshooting.
TABLE OF DIAGNOSTIC CODES:
Code
Description
1
Controller registered, waiting for authorization
2
Not possible to register, controller blacklisted
3
Not possible to register, server has no more capacity
4
Not possible to register, other reason
5
Controller registered and authorized
Value: AirGate ID
Group
Controller I/O
Units
-
Related
applications
All
Description
Identification name generated by AirGate server for the purpose of
establishing communication via WebSupervisor, LiteEdit or InteliMonitor.
Value: Modem Status
Group
Controller I/O
Units
-
Related
applications
All
Description
Status of the modem.
 “--------“ After controller initialization
 “Trying” Modem active. Trying to establish connection.
 “Ready” Modem ready. Communication with modem is OK.

ComAp InteliCompact NT Specifications

General

Brand	ComAp
Model	InteliCompact NT
Category	Controller
Language	English