ComAp InteliCompact NT Reference Guide

InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
89
6.2 Parallel operation flowchart
Gen-set ready
Start sequence
Start command: either pressing
START button in MAN mode or
automatic start in AUT or TEST
mode
StartFail alarm
Start not successful
Stabilization
sequence
Gen. U/f alarm
Voltage and frequency
stabilization not successful
Continues automatically in AUT
mode or by pressing GCB
button in MAN mode
Cooling and stop
sequence
stop sequence
Stop command:
either pressing
STOP button in MAN
mode, or automatic
stop in AUT mode
Gen-set not
ready
Fault reset
GCB open command:
pressing GCB button in
MAN mode
Stop command?
Yes
No
StopFail alarm
Stop not successful
Synchronization
Connecting to the
load
(closing the GCB)
Parallel operation
(kW/PF regulation
or kW/kVAr sharing)
SynchroTimeout
alarm
Synchronization not
successful
Soft loading
Soft unloading
Disconnecting load
(opening GCB)
Stop sequence
continues

ComAp InteliCompact NT Specifications

General

Brand	ComAp
Model	InteliCompact NT
Category	Controller
Language	English