EasyManuals Logo
Home>ComAp>Controller>InteliCompact NT

ComAp InteliCompact NT Reference Guide

ComAp InteliCompact NT
291 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
54
3.19.2 IGL-RA15 remote annunciator
The IGL-RA15 module is a remote annunciator that is connected to the controller via a CAN1 bus. The
module contains:
ï‚· 15 LEDs with configurable colour (red, green, yellow).
ï‚· Binary output for driving an external siren.
ï‚· Horn reset and Lamp test buttons.
The siren is activated automatically if a new yellow or red LED switches on, the duration is adjustable
and it can be silenced by pressing the horn reset button. In the controller the LEDs are configured like
binary outputs, so all binary output functions can be used to drive the LEDs.
NOTE:
THE ADDRESS SELECTION JUMPERS MUST BE IN THE IG POSITION FOR USING THE MODULE WITH THE
INTELICOMPACT
NT
.
A separate manual for the IGL-RA15 module is available for download on the ComAp website

Table of Contents

Other manuals for ComAp InteliCompact NT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ComAp InteliCompact NT and is the answer not in the manual?

ComAp InteliCompact NT Specifications

General IconGeneral
BrandComAp
ModelInteliCompact NT
CategoryController
LanguageEnglish

Related product manuals