5.4 View measured values
Press the button repeatedly until you see the main screen with the kW meter and mode
selector. Then press or to select the requested screen within the measurement page.
THE MAIN SCREEN
5.5 Setpoints – view and change
1. Press the button repeatedly until you see a screen with a list of setpoint groups. Then
select the desired group by pressing the or buttons and finally press the
button to continue to the selected group.
2. Now you will see the list of setpoints which belong to the selected group together with their
current setting. Use the or buttons again to select the setpoint you want to
modify and press .
3. The current value of the setpoint will appear in the right part under the setpoint name and you
can change it by pressing the or buttons. The rate of changing the value will
accelerate when the button is held down.
4. Press the button to confirm the change or to discard it and return to the list of
setpoints of the selected group.
5. Continue by changing another setpoint or press to return to the list of groups.
To Next Page
Loading...
Need help?
General
