InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
Binary output: BI6 Status
This output gives information about the status of binary input 6 of the
controller.
ï‚· If the related binary input is configured as an alarm input, the output
is closed when the assigned alarm is present in the alarmlist.
ï‚· If the related binary input is configured as functional, the output
copies directly the status of the input.
Binary output: BI7 Status
This output gives information about the status of binary input 7 of the
controller.
ï‚· If the related binary input is configured as an alarm input, the output
is closed when the assigned alarm is present in the alarmlist.
ï‚· If the related binary input is configured as functional, the output
copies directly the status of the input.
Binary output: BI8 Status
This output gives information about the status of binary input 8 of the
controller.
ï‚· If the related binary input is configured as an alarm input, the output
is closed when the assigned alarm is present in the alarmlist.
ï‚· If the related binary input is configured as functional, the output
copies directly the status of the input.
Binary output: BI9 Status
This output gives information about the status of binary input 9 of the
controller.
ï‚· If the related binary input is configured as an alarm input, the output
is closed when the assigned alarm is present in the alarmlist.
ï‚· If the related binary input is configured as functional, the output
copies directly the status of the input.
Binary output: IOM BI1 Status
This output gives information about the status of binary input 1 of the
extension IOM/PTM module.
To Next Page
Loading...
Need help?
General
