100 Configuring System Information
Switching Between Stack Masters
1
Open the
Stack Management
page.
2
Check the
Switch Stack Control from Unit 1 to Unit 2
check box.
3
Click
Apply Changes
.
A confirmation message displays.
4
Click
OK
.
The device is reset. After the device is reset, a prompt for a user name and password displays.
Managing Stacks Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the Stack
Management page.
Resetting the Device
The Reset page enables the device to be reset from a remote location. Save all changes to the Startup
Configuration file before resetting the device. This prevents the current device configuration from being
lost. For more information about saving Configuration files, see "Copy Files" on page 239
. To open the
Reset page, click System
→ General → Reset in the tree view.
Figure 6-9. Reset
The Reset page contains the following field:
Reset Unit No. — Resets the selected stacking member.
Table 6-7. Stack Management CLI Commands
CLI Command Description
stack reload Reloads stack members.
stack master Forces the stack master selection
To Next Page
Loading...
Need help?
General
Weight and Dimensions
