Dell PowerConnect 3548 User Manual

Configuring System Information 217
Displaying the MED Port Settings Table
1 Open the MED Port Settings page.
2 Click Show All .
The
MED Port Settings Table opens.
Figure 6-84. MED Port Settings Table
Viewing the LLDP Neighbors Information
The Neighbors Information page contains information received from neighboring device LLDP
advertisements. To open the Neighbors Information page, click System
→ LLDP-MED → Neighbors
Information in the tree view.
Figure 6-85. Neighbors Information
• Port — Displays the port number for which neighbouring information is displayed.
•
Device ID — Displays the neighboring device ID.
•
System Name — Displays the name of the neighboring system .
•
Port ID — Displays the neighboring port ID
•
Capabilities — Displays the neighboring device capabilities.

Dell PowerConnect 3548 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	-
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	48
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	8000 g