Dell PowerConnect 3548 User Manual

Configuring Switch Information 271
Authenticating Users
The Authenticated Users page displays user port access lists. The User Access Lists are defined in the
Add User Name page.
To open the Authenticated Users page, click Switch → Network Security → Authenticated Users.
Figure 7-5. Authenticated Users
The Authenticated Users page contains the following fields:
• User Name — List of users authorized via the RADIUS Server.
•
Port — The port number(s) used for authentication, per user name.
•
Session Time — The amount of time the user was logged on to the device. The field format is
Day:Hour:Minute:Seconds , for example, 3 days: 2 hours: 4 minutes: 39 seconds.
•
Authentication Method — The method by which the last session was authenticated. The possible
field values are:
–
Remote — The user was authenticated from a remote server.
–
None — The user was not authenticated.
•
MAC Address — The supplicant MAC address.

Dell PowerConnect 3548 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	-
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	48
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	8000 g