Dell PowerConnect 3548 User Manual

Viewing Statistics 437
Viewing Port Statistics Using the CLI Commands
The following table contains the CLI commands for viewing port statistics.
Viewing LAG Statistics
Use the LAG Statistics page to open statistics in a chart form for LAGs. To open the LAG Statistics
page, click Statistics/RMON→ Charts→ LAG Statistics in the tree view.
Figure 8-15. LAG Statistics
Table 8-11. Port Statistic CLI Commands
CLI Command Description
show interfaces counters [ethernet
interface | port-channel port-
channel-number
]
Displays traffic seen by the physical
interface.
show rmon statistics {ethernet
interface | port-channel port-
channel-number
}
Displays RMON Ethernet
statistics.
show gvrp statistics {ethernet
interface | port-channel port-
channel-number
}
Displays GVRP statistics.
show gvrp-error statistics {ethernet
interface | port-channel port-
channel-number
}
Displays GVRP error statistics.

Dell PowerConnect 3548 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	-
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	48
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	8000 g