Configuring Switch Information 283
Defining MAC Based Access Control Lists
The Network Security - MAC Based ACL page allows a MAC- based ACL to be defined. ACEs can be
added only if the ACL is not bound to an interface.
To define MAC Based ACLs, click Switch → Network Security → MAC Based ACL.
• Network Security - MAC Based ACL
•
ACL Name
— Displays the user-defined MAC based ACLs.
•
New ACE Priority
— Indicates the ACE priority, which determines which ACE is matched to a packet
on a first-match basis. The possible field values are 1-2147483647.
•
Source Address
— Matches the source MAC address to which packets are addressed to the ACE.
Wildcard masks specify which bits are used and which bits are ignored. A wildcard of 0.0.0.0 indicates
that all the bits are important.
•
Destination Address
— Matches the destination MAC address to which packets are addressed to the
ACE. Wildcard masks specify which bits are used and which bits are ignored. A wildcard of 0.0.0.0
indicates that all the bits are important.
•
VLAN ID
— Matches the packet’s VLAN ID to the ACE. The possible field values are 1 to 4095.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
