Dell PowerConnect 3548 User Manual

Viewing Statistics 425
Viewing RMON History Control Using the CLI Commands
The following table contains the CLI commands for viewing RMON History Control.
The following is an example of the CLI commands:
Viewing the RMON History Table
The RMON History Table contains interface specific statistical network samplings. Each table entry
represents all counter values compiled during a single sample. To open the RMON History Table,
click Statistics/RMON→ RMON→ History Table in the tree view.
Figure 8-9. RMON History Table
Table 8-6. RMON History CLI Commands
CLI Command Description
rmon collection history
index
[owner
ownername | buckets
bucket-number ] [interval
seconds ]
Enables and configures RMON on an
interface.
show rmon collection history
[ethernet
interface | port-
channel
port-channel-
number
]
Displays RMON collection history
statistics.
console(config)# interface ethernet 1/e8
console(config-if)# rmon collection history 1 interval 2400

Dell PowerConnect 3548 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	-
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	48
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	8000 g