EasyManuals Logo
Home>Dell>Switch>PowerConnect 3548

Dell PowerConnect 3548 User Manual

Dell PowerConnect 3548
474 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #445 background imageLoading...
Page #445 background image
Configuring Quality of Service 445
Defining QoS Interface Settings
The Interface Settings page contains fields for deactivating the Trust mode, and setting the default
CoS value on incoming untagged packets. To open the Interface Settings page, click Quality of Service
QoS Parameters Interface Settings in the tree view.
Figure 9-2. Interface Settings
The Interface Settings page contains the following fields:
Interface
— The specific port or LAG to configure.
Disable "Trust" Mode on Interface
— Disables Trust mode on the specified interface. This setting
overrides the Trust mode configured on the device globally.
Set Default CoS For Incoming Traffic To
— Sets the default CoS tag value for untagged packets.
The CoS tag values are 0-7. The default value is 0.
Assigning QoS settings for an interface:
1
Open the
Interface Settings
page.
2
Select an interface in the
Interface
field.
3
Define the fields.
4
Click
Apply Changes
.
The CoS settings are assigned to the interface.
Displaying QoS/CoS settings:
1
Open the
Interface Settings
page.
2
Click
Show All
.
The Interface Table is displayed.

Table of Contents

Other manuals for Dell PowerConnect 3548

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 3548 and is the answer not in the manual?

Dell PowerConnect 3548 Specifications

General IconGeneral
MAC address table8000 entries
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10/100 Mbps
10G support-
Number of VLANs256
Flow control supportYes
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)440 x 257 x 43.2 mm
Networking featuresGigabit Ethernet, Fast Ethernet
Authentication methodRADIUS, TACACS+
Connectivity technologyWired
Switch typeManaged
Switch layerL2
Data link protocolsEthernet
Supported network protocolsHTTP, HTTPS/SSL, SSH
Power connectorDC-in jack
SFP/SFP+ slots quantity2
Basic switching RJ-45 Ethernet ports quantity48
Product colorBlack
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)10 - 95 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight8000 g

Related product manuals