Dell PowerConnect 3548 User Manual

120 Configuring System Information
Viewing the Log File Table
The Log File Table contains information about log entries saved to the Log File in FLASH, including
the time the log was entered, the log severity, and a description of the log message. To open the Log File
Tab le, click System
→ Logs → Log File in the tree view.
Figure 6-21. Log File Table
The Log File Table contains the following fields:
• Log Index — The log number in the Log File Table .
•
Log Time — Indicates the time at which the log was entered in the Log File Table .
•
Severity — Indicates the log severity.
•
Description — The log message text.
Displaying the Log File Table Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing and setting fields displayed
in the Log File Table.
Table 6-16. Log File Table CLI Commands
CLI Command Description
show logging file Displays the logging state and the syslog
messages stored in the logging file.
clear logging file Clears messages from the logging file.

Dell PowerConnect 3548 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	-
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	48
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	8000 g