Dell PowerConnect 3548 User Manual

Using Dell OpenManage Switch Administrator 69
Using Dell OpenManage Switch Administrator
This section provides an introduction to the Dell™ OpenManage™ Switch Administrator
user interface.
Starting the Application
NOTE: Before starting the application the IP address must be defined. For more information, see Initial
Configuration.
1 Open a web browser.
2 Enter the device’s IP address in the address bar and press <Enter>.
3 When the Log In window displays, enter a user name and password.
NOTE: Passwords are both case sensitive and alpha-numeric.
4 Click OK .
The
Dell OpenManage Switch Administrator home page displays.
Understanding the Interface
The home page contains the following views:
• Tree view — Located on the left side of the home page, the tree view provides an expandable view
of the features and their components.
•
Device view — Located on the right side of the home page, the device view provides a view of the
device, an information or table area, and configuration instructions.

Dell PowerConnect 3548 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	-
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	48
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	8000 g