Dell PowerConnect 3548 User Manual

352 Configuring Switch Information
Defining VLAN Membership
The VLAN Membership page contains fields for defining VLAN groups. The device supports the
mapping of 4094 VLAN IDs to 256 VLANs. All ports must have a defined PVID. If no other value is
configured the default VLAN PVID is used. VLAN ID #1 is the default VLAN, and cannot be deleted
from the system.
To open the VLAN Membership page, click Switch
→ VLAN→ VLAN Membership in the tree view.
Figure 7-46. VLAN Membership
The VLAN Membership page contains the following fields:
• Show VLAN — Lists and displays specific VLAN information according to VLAN ID or VLAN name.
•
VLAN Name (0-32 Characters) — The user-defined VLAN name.
•
Status — The VLAN type. Possible values are:
–
Dynamic — The VLAN was dynamically created through GVRP.
–
Static — The VLAN is user-defined.

Dell PowerConnect 3548 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	-
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	48
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	8000 g