EasyManuals Logo
Home>Dell>Switch>PowerConnect 3548

Dell PowerConnect 3548 User Manual

Dell PowerConnect 3548
474 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32 Hardware Description
The RJ-45 LED indications for PowerConnect 3524P and PowerConnect 3548P are described in the
following table:
Gigabit Port LEDs
The following table describes the Gigabit (stacking port) LEDs:
Table 2-2. PowerConnect 3524P and PowerConnect 3548P RJ-45 Copper based 100BaseT LED Indications
LED Color Description
Speed/Link/Act Green Static The port is currently linked at 100 Mbps.
Green Flashing The ports is currently operating at 100 Mbps.
OFF The port is currently operating at 10 Mbps or is not linked.
FDX Green Static The Powered Device (PD) is detected and is operating at normal load. For more
information about Powered Devices, see "Managing Power over Ethernet".
Green Flashing The port is operating at transitional mode. The PD is being detected, or is faulty.
For more information about Power over Ethernet, see "Managing Power over
Ethernet".
Amber Static An overload or short has occurred on the Powered Device. For more information
about Power over Ethernet faults, see "Managing Power over Ethernet".
Amber
Flashing
The powered device power conception exceeds the predefined power allotment.
For more information about Power over Ethernet power allotments, see
"Managing Power over Ethernet".
OFF No powered device is detected.
Table 2-3. PowerConnect 3524 and PowerConnect 3548 RJ-45 Copper based 100BaseT LED Indications
LED Color Description
Link/Activity/Speed Green Static The port is running at 1000 Mbs.
Green Flashing The port is either transmitting or receiving data at 1000 Mbps.
Yellow Static The port is running at 10 or 100Mbs.
Yellow Flashing The port is either transmitting or receiving data at 10 or 100 Mbps.
OFF The port is currently not operating.
FDX Green Static The port is currently operating in Full Duplex mode.
OFF The port is currently operating in Half Duplex mode.

Table of Contents

Other manuals for Dell PowerConnect 3548

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 3548 and is the answer not in the manual?

Dell PowerConnect 3548 Specifications

General IconGeneral
MAC address table8000 entries
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10/100 Mbps
10G support-
Number of VLANs256
Flow control supportYes
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)440 x 257 x 43.2 mm
Networking featuresGigabit Ethernet, Fast Ethernet
Authentication methodRADIUS, TACACS+
Connectivity technologyWired
Switch typeManaged
Switch layerL2
Data link protocolsEthernet
Supported network protocolsHTTP, HTTPS/SSL, SSH
Power connectorDC-in jack
SFP/SFP+ slots quantity2
Basic switching RJ-45 Ethernet ports quantity48
Product colorBlack
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)10 - 95 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight8000 g

Related product manuals