118 Configuring System Information
Viewing the RAM Log Table
The RAM Log Table contains information about log entries kept in RAM, including the time the log was
entered, the log severity, and a description of the log. To open the RAM Log Table, click System
→ Logs
→ RAM Log in the tree view.
Figure 6-20. RAM Log Table
The RAM Log Table contains the following fields:
•
Log Index
— The log number in the
RAM Log Table
.
•
Log Time
— Indicates the time at which the log was entered into the
RAM Log Table
.
•
Severity
— Indicates the log severity.
•
Description
— Description of the log entry.
Removing Log Information:
1
Open the
RAM Log Table
.
2
Click
Clear Log
.
The log information is removed from the
RAM Log Table
, and the device is updated.
Viewing and Clearing the RAM Log Table Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing and clearing fields displayed
in the RAM Log Table.
Table 6-15. RAM Log Table CLI Commands
CLI Command Description
show logging Displays the state of logging and the syslog
messages stored in the internal buffer.
clear logging Clears logs.
To Next Page
Need help?
General
Weight and Dimensions
