EasyManuals Logo

Dell PowerConnect 3548 User Manual

Dell PowerConnect 3548
474 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #444 background imageLoading...
Page #444 background image
444 Configuring Quality of Service
Queue Settings
Strict Priority
— Indicates the system queues are SP queues, when selected.
WRR
— Indicates the system queues are WRR queues, when selected.
Enabling Quality of Service:
1
Open the
Global Settings
page
.
2
Select
Enable
in the
Quality of Service
field.
3
Click
Apply Changes
.
Class of Service is enabled on the device.
Enabling the Trust Mode:
1
Open the
Global Settings
page
.
2
Define the
Trust Mode
field.
3
Click
Apply Changes
.
Trust mode is enabled on the device.
Enabling Trust Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the Global
Settings page.
The following is an example of the CLI commands:
This section contians the following topics:
"Defining QoS Interface Settings" on page 445
"Defining Bandwidth Settings" on page 446
"Mapping CoS Values to Queues" on page 448
"Mapping DSCP Values to Queues" on page 450
Table 9-3. QoS Settings CLI Commands
CLI Command Description
qos trust [cos | dscp] Configures the system to trust mode.
no qos trust Returns to the non-trusted state.
console(config)# qos trust dscp

Table of Contents

Other manuals for Dell PowerConnect 3548

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 3548 and is the answer not in the manual?

Dell PowerConnect 3548 Specifications

General IconGeneral
MAC address table8000 entries
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10/100 Mbps
10G support-
Number of VLANs256
Flow control supportYes
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)440 x 257 x 43.2 mm
Networking featuresGigabit Ethernet, Fast Ethernet
Authentication methodRADIUS, TACACS+
Connectivity technologyWired
Switch typeManaged
Switch layerL2
Data link protocolsEthernet
Supported network protocolsHTTP, HTTPS/SSL, SSH
Power connectorDC-in jack
SFP/SFP+ slots quantity2
Basic switching RJ-45 Ethernet ports quantity48
Product colorBlack
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)10 - 95 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight8000 g

Related product manuals