Configuring System Information 191
Displaying the Local User Table:
1
Open the
Local User Database
page.
2
Click
Show All.
The
Local User Table
opens.
Figure 6-67. Local User Table
Reactivating a Suspended User:
1
Open the
Local User Database
page.
2
Select a
User Name
entry.
3
Select the
Reactivate Suspended User
check box.
4
Click
Apply Changes
.
The user access rights are reactivated, and the device is updated. You can also reactivate suspended
users from the Local User Table.
Deleting Users:
1
Open the
Local User Database
page.
2
Select a
User Name.
3
Select the
Remove
check box.
4
Click
Apply Changes
.
The selected user is deleted, and the device is updated.
Assigning Users Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Local
User Database page.
Table 6-38. Local User Database CLI Commands
CLI Command Description
username name [password password] [level level] [encrypted] Establishes a username-based authentication system.
set username name active Reactivates a suspended user’s access rights.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
