EasyManuals Logo

Dell PowerConnect 3548 User Manual

Dell PowerConnect 3548
474 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #406 background imageLoading...
Page #406 background image
406 Viewing Statistics
Figure 8-1. Utilization Summary
The Utilization Summary page contains the following fields:
Refresh Rate
—Indicates the amount of time that passes before the interface statistics are refreshed.
The possible field values are:
15 Sec
— Indicates that the interface statistics are refreshed every 15 seconds.
30 Sec
— Indicates that the interface statistics are refreshed every 30 seconds.
60 Sec
— Indicates that the interface statistics are refreshed every 60 seconds.
No Refresh
— Indicates that the interface statistics are not refreshed automatically.
Interface
— The interface number.
Interface Status
— Status of the interface.
% Interface Utilization
— Network interface utilization percentage based on the duplex mode of the
interface. The range of this reading is from 0 to 200%. The maximum reading of 200% for a full duplex
connection indicates that 100% of bandwidth of incoming and outgoing connections is used by the
traffic travelling through the interface. The maximum reading for a half duplex connection is 100%.
% Unicast Received
— Percentage of Unicast packets received on the interface.
% Non Unicast Packets Received
— Percentage of non-Unicast packets received on the interface.
% Error Packets Received
— Percentage of packets with errors received on the interface.
Global System LAGs
— Indicates the current global LAG utilization.

Table of Contents

Other manuals for Dell PowerConnect 3548

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 3548 and is the answer not in the manual?

Dell PowerConnect 3548 Specifications

General IconGeneral
MAC address table8000 entries
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10/100 Mbps
10G support-
Number of VLANs256
Flow control supportYes
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)440 x 257 x 43.2 mm
Networking featuresGigabit Ethernet, Fast Ethernet
Authentication methodRADIUS, TACACS+
Connectivity technologyWired
Switch typeManaged
Switch layerL2
Data link protocolsEthernet
Supported network protocolsHTTP, HTTPS/SSL, SSH
Power connectorDC-in jack
SFP/SFP+ slots quantity2
Basic switching RJ-45 Ethernet ports quantity48
Product colorBlack
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)10 - 95 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight8000 g

Related product manuals