Dell PowerConnect 8024 User Manual

Managing Images and Files 327
Managing Files on a USB Flash Device (PowerConnect 8100-series
switches only)
Beginning in Privileged EXEC mode, use the following commands to manage
files that are on a USB device that is plugged into the USB flash port on the
front panel of the switch.
Uploading a Configuration File (SCP)
Beginning in Privileged EXEC mode, use the following commands to upload
a configuration file from the switch to a remote system by using SCP.
Command Purpose
show usb device Display USB flash device details
dir usb Display USB device contents and memory statistics
copy usb://
filename
{backup-config | image
| running-config | script
filename | startup-config
|
filename
Copy the specified file from the USB flash device to the
specified file in internal flash.
unmount usb Make the USB flash device inactive.
Command Purpose
copy
file scp:// user @{ ip-
address
| hostname }/ path
/ file-name
Adds a description to an image file.
The file can be one of the following files:
•backup-config
•image
•operational-log
• running-config
•script
file-name
•startup-config
•startup-log
Password entry After you enter the copy command, the CLI prompts you
for the password associated with the username.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries