Dell PowerConnect 8024 User Manual

Configuring L2 Multicast Features 711
Removing a Bridge Multicast Group
To delete a bridge multicast group:
1
Open the Bridge Multicast Group page.
2 Select the VLAN ID associated with the bridge multicast group to be
removed from the drop-down menu.
The
Bridge Multicast Address and the assigned ports/LAGs display.
3 Check the Remove check box.
4 Click Apply .
The selected bridge multicast group is removed, and the device is updated.
MRouter Status
Use the MRouter Status page to display the status of dynamically learned
multicast router interfaces.
To access this page, click Switching
→ Multicast Support → MRouter Status
in the navigation panel.
Figure 26-4. MRouter Status

Dell PowerConnect 8024 Specifications

General

Brand	Dell
Model	PowerConnect 8024
Category	Switch
Language	English