Re-Amping a Guitar Track
Using one of the Dry Guitar configurations for recording gives you the opportunity of playing a dry take back
into the GNX4 for re-processing. The advantages of having this feature are you can experiment playing the
dry guitar take back through different amp models, effects,or entirely new presets once you have your other
tracks recorded. This helps when trying to fit a guitar sound into a mix after the song is assembled rather
than relying on tricky EQ settings that can tarnish the tone you originally recorded.
To re-amp a track back through the GNX4, follow these steps:
1. Put the GNX4 into Recorder Mode by pressing the MODE button located on the Control Panel or by
pressing FOOTSWITCHES 4 and 5 simultaneously until the display flashes
recorder.
2. From the Pro Tracks Plus menu bar, select File>New. The New Project File window will open.
3. Select the Normal-Hands Free Session project template.
4. Press the SHIFT and CF/USB 1-2 SRC buttons, then use the DATA WHEEL to select
dryguitr.
Then press the USB 3-4 SRC button and use the DATA WHEEL to select
usb off.
5. Press the RECORD footswitch. The GNX4’s display reads
record. A track is automatically inserted in
the current session of the Pro Tracks Plus software and recording on this track begins.
6. To stop recording,press the STOP/UNDO footswitch. The GNX4’s display reads
stop and recording
will stop. Press Stop again to rewind to the beginning of the track.
7. In the Out box of the track you just recorded,select B(Digitech USB 1-2 In/Out).
9. In the tool bar press the Console View button to see the mixing console.
10. Pan the B - Mains Output hard left and the A - Mains Output hard right.
97
Computer Recording via USB
To Next Page
Loading...
Need help?
General
