DigiTech GNX4 User Manual

Warping Amp Channels Together
When the Amps and Cabinets in Channel 1 and Channel 2 are dialed in to suit your taste,we can Warp
their characteristics together to create a new HyperModel. To warp the amps do the following:
1. Press the GENETX Amp Control button.
2. Rotate Knob 3 (Warp) knob to blend the Amps and Cabinets together to create a new unique amp.
Save the HyperModel
™
Now that we have designed our own Amp/Cabinet HyperModel,we need to save it to one of the 9 User
HyperModel locations. This allows us to use it in presets. To save the HyperModel,do the following:
1. Press the AMP SAVE button until the display reads
NEW AMP and the first letter (N) is flashing. For
this example, let’s name the HyperModel “Rectweed” (Rectified Tweed).
2. Rotate the DATA WHEEL to select R as the first letter.
3. Press the NEXT ARROW button to select the next character in the display. Continue using the
DATA WHEEL and NEXT ARROW button until the display reads
RECTWeeD.
4. When the display reads
RECTWeeD,press the AMP SAVE button again.
5. Now we need to choose one of the 9 User HyperModel locations. Use the DATA WHEEL to select
a an empty user location. The display should read
EMPTY (Empty) and the red numeric display should
read
U1 if this is the first HyperModel stored to your GNX4.
6. Press the AMP SAVE button again to save to this Amp location. The display briefly reads
AMP
SaVeD
(Amp Saved) and then returns to the name of the selected preset.
4. & 6. Press the Amp
Save Button
5. Use the Data Wheel
to Select an empty
User or Card Amp Location
EMPTY U1
1. Press the
Amp Save
Button
3. Use Next Arrow Button
To Select Character Locations
2. Use Data Wheel
to Change
Characters
NEW AMP
1. Press the GENTEX
Amp Control Button
2. Rotate Parameter 3 Knob To Warp Amp
and Cabinet Models Together
53
Creating a Preset

DigiTech GNX4 Specifications

General

Brand	DigiTech
Model	GNX4
Category	Music Pedal
Language	English