DigiTech GNX4 User Manual

Adjust the Channel 1 Parameters
The Tweed amp that we selected for our Channel 1 assignment uses the factory default settings for the
Gain,EQ, and Level Parameters.Therefore,you may want to change the settings. To access the
Parameters for Channel 1,do the following:
1. Press the TONE Amp Control button.
2. Press the STATUS button three times to select Channel 1’s Parameters. The display will read
ch1
amp
and all the horizontal LEDs will light green indicating that all 5 knobs will adjust Channel 1’s
Parameters.
3. Rotate Knob 1 to adjust the Tweed Amp’s Gain. The range is from
0 to 99.
4. Rotate Knob 2 to adjust the Tweed Amp’s Bass EQ Level (boost/cut). The range is from -12 dB
(
-12) to +12 dB (12).
5. Rotate Knob 3 to adjust the Tweed Amp’s Midrange EQ Level(boost/cut). The range is from -12 dB
(
-12) to +12 dB (12).
6. Rotate Knob 4 to adjust the Tweed Amp’s Treble EQ Level(boost/cut). The range is from -12 dB
(
-12) to +12 dB (12).
7. Rotate Knob 5 to adjust the Tweed Amp’s Level. The range is from
0 to 99.
Adjust the Channel 2 Parameters
Like the Tweed amp in Channel 1,the Rectified amp in Channel 2 may need to be adjusted to suit your
personal taste. To access the Parameters for Channel 2,do the following:
1. Press the STATUS button three times to select Channel 2’s Parameters. The display will read
ch2
amp
and all the horizontal LEDs will light red indicating that all 5 knobs will adjust Channel 2’s
Parameters.
2. Rotate Knob 1 to adjust the Rectified Amp’s Gain. The range is from
0 to 99.
3. Rotate Knob 2 to adjust the Rectified Amp’s Bass EQ Level (boost/cut). The range is from -12 dB
(-
12) to +12 dB (12).
4. Rotate Knob 3 to adjust the Rectified Amp’s Midrange EQ Level(boost/cut). The range is from
-12 dB (-
12) to +12 dB (12).
5. Rotate Knob 4 to adjust the Rectified Amp’s Treble EQ Level(boost/cut). The range is from
-12 dB (-
12) to +12 dB (12).
6. Rotate Knob 5 to adjust the Rectified Amp’s Level. The range is from
0 to 99.
1. Press the TONE
Amp Control Button
2. Press the Status Button
Until Display Reads CH1 AMP
and All LEDs Light Green
3, 4, 5, Rotate Parameter Knobs to Adjust
6, 7. Channel 1's Gain, EQ Level,
and Amp Level
51
Creating a Preset

DigiTech GNX4 Specifications

General

Brand	DigiTech
Model	GNX4
Category	Music Pedal
Language	English