To Next Page

To Previous Page

Using the UNDO Footswitch to Erase a Track

If you are not happy with a track you just recorded,no problem. You can easily delete,or Undo the last

recorded track using the GNX4’s footswitches. To Undo a track that was just recorded,follow these

steps:

Using Undo While the Recorder is Stopped

1.Press and hold the STOP/UNDO footswitch once. The GNX4’s main display reads del trkx,

indicating the last recorded track will be deleted.

2.Press the STOP/UNDO footswitch again within 3 seconds to delete the track. If the

STOP/UNDO footswitch is not pressed a second time within 3 seconds of the first press,the

recorder ignores the undo request and returns to its normal stopped state.

Using Undo While Recording is in Progress

You can Undo a track while recording is in progress. This eliminates having to stop the recorder,

rewinding, and having to start over. To undo the track you are currently recording on,follow these

steps:

1.Press and hold the STOP/UNDO footswitch once. The GNX4’s main display reads

rerecrd?.

2.Press the STOP/UNDO footswitch again within 3 seconds to start re-recording. The display reads

undo then undodone and the recorder returns to the beginning of the song and resumes

recording on the same track. If the UNDO footswitch is not pressed again within 3 seconds of the

first press,the recorder ignores the undo request and recording continues unaffected. If you don’t

want to have the recorder automatically start re-recording when using UNDO, press the

STOP/UNDO footswitch to stop recording before using the UNDO function.

Using the Footswitches for Punching In/Punching Out

There may be times you want to replace a track section in the middle of a song. Rather than recording

on a new track at the very beginning and wasting recording time with silence, you can “punch in” the

phrase you want to record at a certain point on the track. To punch in record,follow these steps:

1.Begin with the Recorder stopped.

2.Arm the track that you want to punch in and record on (theTRACK button will light red).

2.Press the PLAY footswitch. Tracks that are armed for playback begin playing,and the TRACK button

armed for recording flashes red.

3.When you reach the point in the playback that you want the recording to begin, press the RECORD

footswitch. The TRACK button armed for recording,lights solid red and recording begins on the

track at this point.

4.When you are finished recording,press the RECORD footswitch to continue listening to playback and

disable the track armed for recording,or press the STOP/UNDO footswitch to stop.

The GNX4’s 8-Track Recorder

DigiTech GNX4 User Manual

Other manuals for DigiTech GNX4