dry line - Dry Line Left signal is sent to one available track of the onboard recorder or up the USB 1
channel. Dry Line Right is sent to the other available track of the onboard recorder or up
the USB 2 channel.
dryguitr - Dry Guitar signal is sent to an available track of the onboard recorder or up the USB 1
channel. Nothing is sent up the USB 2 channel.
dry mic - Dry Mic signal is sent to an available track of the onboard recorder or up the USB 1 channel.
Nothing is sent up the USB 2 channel.
drums st - The GNX4 drums playback or MP3 is sent to two available tracks of the onboard recorder
or up the USB 1 and 2 channels.
drums mn - The GNX4 drums playback or MP3 (summed to mono) is sent to one available track of the
onboard recorder or up the USB 1 channel. Nothing is sent up the USB 2 channel.
reamp 1-8/usb - Playback of a pre-recorded, dry guitar track can be routed back through the GNX4’s
effects processing and recorded back onto two available tracks of the onboard
recorder or back up the USB 1 and 2 busses. Selecting
REAMP 1-8 determines the
source of the dry guitar from the onboard recorder playback. Selecting
REAMPUSB
determines the source of the dry guitar is from the computer. See Re-Amping a
Guitar Track on pages 82 and 97 for more information how this feature works.
USB 3-4 Source
USB OFF - USB 3 and 4 are disabled.
DGTR+Mic - Dry guitar signal is sent up the USB 3 channel. Dry mic signal is sent up the USB 4 channel.
dry line - Dry Line Left signal is sent up the USB 3 channel and Dry Line Right signal is sent up the
USB 4 channel.
DRYGuiTR - Dry guitar signal is sent up the USB 3 channel. Nothing is sent up the USB 4 channel.
DRY MIC - Dry mic signal is sent up the USB 3 channel. Nothing is sent up the USB 4 channel.
DRUMS st - GNX4 drum playback is sent stereo up the USB 3 and 4 channels.
DRUMS mn - GNX4 drum playback is sent mono up the USB 3 channel. Nothing is sent up the USB 4
channel.
65
Audio Routing for Recording
To Next Page
Loading...
Need help?
General
