DigiTech GNX4 User Manual

Reverb
Reverb gives the listener a sense that the music is being performed in various acoustical environments. It
can provide the tight acoustics of a small room, or the ambience of a huge arena.
Reverb On/Off -The Status button turns the Reverb (
reverb) on and off.
Reverb Type - Knob 1 selects the type of Reverb or acoustic environment. The GNX4 provides ten
different environments to choose from including:
PreDelay - Knob 2 adjusts the amount of time (
PREDeLaY) it takes for the initial sound to reach the
first reflective surface in the simulated environment. Ranges from
0 to 15.
Decay - Knob 3 adjusts the length of time the Reverb is audible (
DECAY). Ranges from 0 to 99.
Damping - Knob 4 controls the amount of sound which is absorbed (
damping) in the simulated
environment. Ranges from
0 to 99.
*Reverb Balance -The Reverb Balance adjusts the left/right balance of the Reverb signal. Ranges from
L 99 to R 99.
Reverb Level - Knob 5 adjusts the level (
rvb levl) of the Reverb. Ranges from 0 to 99.
*These Parameters are only available using the X-E
DIT
™
Editor/Librarian software.
STUDIO = Studio
ROOM = Wood Room
CLUB = Club
PLATE = Plate
HALL = Hall
THEATER = Amphitheater
CHURCH = Church
GARAGE = Parking Garage
ARENA = Arena
SPRING = Spring
44
Effects and Parameters

DigiTech GNX4 Specifications

General

Brand	DigiTech
Model	GNX4
Category	Music Pedal
Language	English