Scan Mode Settings
315
System Settings
11
Original Size Defaults
Set the original size shown in [Original Size] in the [Layout Adjustment] screen. An
original size is assigned to each of the 11 buttons other than [Auto Size Detect].
When frequently scanning non-standard size originals, by presetting the non-standard
size, you can save time to enter the original size each time a document is scanned.
îš„A/B Series Size
Select from the A and B series, such as A4 and B5.
îš„Inch Size
Select from the Inch series, such as 8.5 x 11" and 11 x 17".
îš„Others
Select from the sizes other than the above series, such as photo and postcard sizes.
îš„Variable Size
You can enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to
297 mm in 1 mm increments.
Output Size Defaults
Set the sizes to be displayed at [Output Size] when selecting [Auto %] for scanning
documents at [Reduce/Enlarge] in the [Layout Adjustment] screen.
Any output sizes can be assigned to output size buttons 1 to 8.
By setting the commonly used sizes, you can reduce the number of selection operations for
scanning.
îš„A/B Series Size
Select from 10 sizes of A and B series.
îš„Inch Size
Select from 12 sizes of inch series.
îš„Others
Select from other 13 sizes.
Reduce/Enlarge Presets
Set the magnifications shown in [Preset %] for [Reduce/Enlarge] in the [Layout
Adjustment] screen.
You can assign any magnification to the R/E Preset buttons 1 to 7 other than [100%].
îš„Preset %
Select from 20 standard magnification ratios.
îš„Variable %
You can specify a magnification within the range from 25 to 400% in 1% increments.
Other Settings
You can make other settings relating to the scanner feature specification.
Scan Service
Set whether or not to use the scanner feature.
To Next Page
Loading...
Need help?
General
