15 Maintenance
432
Maintenance
15
Cleaning the Document Feeder Roller
If the machine is equipped with a document feeder and if the document feeder roller is
dirty, streaks or smears may appear on copies and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a
month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying or printing.
1 Pull up the knob on the left cover of
the document feeder, and open the
document feeder cover completely.
Note • When you fully open the
cover, it enters a fixed
position. Open the cover
gently.
2 While turning the roller, gently
clean it with a soft cloth moistened
with water.
Important • Do not use cleaning agents
other than water or neutral
detergent.
• Use a cloth firmly wrung to
prevent water drops from
falling into the machine. If
water gets into the machine, it
may cause machine malfunction.
Note • If dirt does not come off easily, gently wipe it with a soft cloth moistened with a small amount
of neutral detergent.
3 Close the left cover of the document feeder until it clicks into place.
To Next Page
Loading...
Need help?
General
