Login Setup/Auditron Administration
361
System Settings
11
Important • When switching to or from the remote access mode, the following information is lost.
- All user information
- Personal mailboxes and personal job flow sheets
• When a Kerberos server is used as a remote authentication server, if the time of the remote
authentication server and that of this machine differs, authentication may fail.
• Remote Access is not available when enabling [TCP/IP - IP Filter] of [Protocol Settings] in
[Network Settings] under [System Settings] on the touch screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
îš„Guest User
Set whether to allow a user not registered with the remote authentication server to use the
machine as a guest user.
îš„Guest Password
Configure the guest password as necessary. You can set the password from 4 to 12 digits.
Xerox Standard Accounting
Carries out the auditron authentication based on accounting users registered on the machine.
Auditron Mode
Select whether to use the auditron administration feature when using the copy, fax, scan, and
print services. Note that Login Setup/Auditron Administration cannot be used unless the
system administrator user ID is set.
For information about the items you can manage, refer to Authentication and Auditron Administration
(P.399).
Note • To set the fax charging data, be sure to select [Exit] to exit the System Administration mode,
then once again enter the System Administration mode to make the settings.
• The items appearing depend on the services provided.
îš„Copy Service
Set whether to enable the Login Setup/Auditron Administration feature for copy operations.
îš„Fax Service
Set whether to enable the Login Setup/Auditron Administration feature for fax and iFax
operations.
îš„Scan Service
Set whether to enable the Login Setup/Auditron Administration feature for scan operations.
îš„Print Service
Set whether to enable the Login Setup/Auditron Administration feature for print operations.
Note • A job may be cancelled depending on the settings for Receive Control (P.357)
Mailbox Access
Set whether to carry out authentication when printing or retrieving documents stored in a
mailbox.
Note • This item appears when a mailbox is registered.
îš„Login During Printing
Set whether authentication is required when a document within a mailbox is printed.
îš„Login During Retrieval
Set whether authentication is required when a document within a mailbox is retrieved through
the network.
To Next Page
Loading...
Need help?
General
