To Next Page

To Previous Page

Simple Operating Procedures

593

Appendix

Copy Settings

To constantly allow mixed sized originals to be loaded

[Copy Mode Settings] J [Copy Defaults] J [Mixed Sized Originals] J [On]

For more information, refer to "Mixed Sized Originals" (P.294).

Common Settings

To change the system administrator ID

J [System Administrator Settings] J [System Administrator Login ID]

* The default setting is "11111".

For more information, refer to "System Administrator Login ID" (P.351).

To change the time for switching to the Power Saver mode

[Common Settings] J [Machine Clock/Timers] J [Auto Power Saver]

For more information, refer to "Auto Power Saver" (P.276).

To change the volume of the machine's audio tone

[Common Settings] J [Audio Tones] J Select a volume

For more information, refer to "Audio Tones" (P.276).

To check the network settings (such as IP address)

Machine Status J [Billing Meter/Print Report] J [Print Report/List] J

[Copy Mode Settings*] J [Settings List - Common Items]

[Copy Mode Settings] will be [Print Mode Settings], [Fax Mode Settings], or [Scan Mode Settings]

depending on the situation.

For more information, refer to "Settings List - Common Items" (P.389).

To print a report/list to check the machine information

Machine Status J [Billing Meter/Print Report] J [Print Report/List] J Select a report

For more information, refer to "Printing a Report/List" (P.433).

To have a report/list printed (or not printed) automatically

[Common Settings] J [Reports] J Select a report

For more information, refer to "Reports" (P.282).

To change features to be displayed on the initial screen

[Common Settings] J [Screen/Button Settings] J [Screen Default]

For more information, refer to "Screen Default" (P.278).

Fuji Xerox DocuCentre-II 3005 User Manual

Other manuals for Fuji Xerox DocuCentre-II 3005