114
Chapter 4 Manual OS Installation
4.1 Creating Driver Disks
When installing the OS manually, it is necessary to create driver installation disks
beforehand. Also, driver disks must be created when you add an expansion card
during server operation.
4.1.1 Required Driver Disks
Prepare for the floppy disks in advance to create the driver disks. A floppy disk is necessary for each
driver.
The driver disks to be created differ depending on the OS to be installed.
` Standard driver provided with the OS is installed automatically at the OS installation.
` You need a Server Start Disc 1 CD-ROM to install the driver provided with the Server Start CD-ROM.
Prepare for it in advance.
■ For Windows Server 2003 x64
*1: Created by the ServerStart FloppyBuilder function
table: Drivers Required for Installing Windows Server 2003 x64
Expansion card / onboard controller Driver
Chipset Driver provided with the Server Start CD-ROM
Graphic controller Standard driver provided with the OS
Onboard SCSI controller Standard driver provided with the OS
RAID Ctrl 0-Channel 128MB w/ BBU
(PG-140D1)
PG-140D1(LSI Logic MegaRAID320-0X Step2) Driver
Windows 2003 for x64 Edition Drivers Disk V4.0L20
*1
Onboard LAN TX150 S4 Onboard LAN Driver Windows 2003 Drivers Disk
Ver8.39.1.0
*1
LAN card (PG-1852 / PG-1892)
PG-185x/186x/188x/189x LAN Driver Windows 2003 for x64
Edition Drivers Disk Ver10.1
*1
LAN card (PG-2861) PG-286x LAN Driver Windows 2003 for x64 Edition Drivers
Disk Ver10.1
*1
SCSI Ctrl U160 (PG-128) Standard driver provided with the OS
SCSI Ctrl U160 w (PG-129B)
GEM318 driver Driver provided with the Server Start CD-ROM
Other expansion cards Driver supplied with the expansion card
To Next Page
Loading...
Need help?
General