Fujitsu primergy TX150 User Manual

186
Chapter 7 Installing Internal Options
7.2 Removing and Attaching Covers
Remove covers to install peripheral devices. Perform the following procedures to
remove covers.
7.2.1 Removing Covers
1 Turn off the server and connected devices, and unplug all power cables from
the outlet.
2 Remove the hard disk cover.
Tilt the hard disk cover toward you and pull it up to remove.
• Before removing or attaching covers, turn off the server, all peripheral devices,
and any other connected devices. Also unplug all power cables from the
outlet. Failure to do so can cause electric shock ("1.4.4 Turning Off the Server"
(Jpg.35)).
1
2

Fujitsu primergy TX150 Specifications

General

Brand	Fujitsu
Model	primergy TX150
Category	Server
Language	English