Fujitsu primergy TX150 User Manual

167
PRIMERGY TX150 S4 User’s Guide
5
Operations after OS Installation
■ For Windows Server 2003, Windows 2000 Server
` If the OS is installed using ServerStart, "BACS" is already installed with the driver. If the OS is installed
manually, BACS will not be installed.
1 Execute the following file contained in the ServerStart Disc 1 CD-ROM.
[CD-ROM drive]: \PROGRAMS\GENERAL\Broadcom\MgmtApps\setup.exe
The installer starts up.
2 Proceed the installation by following the window instructions.
When the window below appears during the installation procedure, check [BASP] and click
[Next].
5.6.2 VLAN Setup Procedure
1 Start up BACS. The procedure differs depending on the OS being used.
For Windows Server 2003 / Windows Server 2003 x64
1. Click [Start] → [Control Panel] → [Broadcom Control Suite 2].
For Windows 2000 Server
1. Click [Start] → [Settings] → [Control Panel].
The [Control Panel] window appears.
2. Start up "Broadcom Control Suite 2".
2 Right-click a LAN adapter or the Team name of a Teamed Up adapter and click
[Add VLAN] from the displayed menu.
` A LAN adapter is displayed with a mark.
` The Team name of a Teamed Up adapter is displayed with a mark.

Fujitsu primergy TX150 Specifications

General

Brand	Fujitsu
Model	primergy TX150
Category	Server
Language	English