Fujitsu primergy TX150 User Manual

226
Chapter 8 Configuring Hardware and Utilities
8.2.7 PCI Configuration Submenu
Use this submenu to set the PCI device.
table: Items on the PCI Configuration Submenu
Item Setting Description
PCI SLOTS Configuration Configures the PCI slots. Press the [Enter] key to display the [PCI SLOTS
Configuration] submenu window.
PCI Slot 1 Configuration
Option ROM SCAN
• Enabled
• Disabled (Initial value)
Sets whether or not to initialize the extended ROM in
each PCI slot.
This server supports Slot 1 to 5.
PCI Slot 2 Configuration
Option ROM SCAN
• Enabled (Initial value)
• Disabled
PCI Slot 3 Configuration
Option ROM SCAN
• Enabled
• Disabled (Initial value)
PCI Slot 4 Configuration
Option ROM SCAN
• Enabled
• Disabled (Initial value)
PCI Slot 5 Configuration
Option ROM SCAN
• Enabled
• Disabled (Initial value)
PCI Slot 6 Configuration
Option ROM SCAN
• Enabled
• Disabled (Initial value)
PCI Slot 7 Configuration
Option ROM SCAN
• Enabled
• Disabled (Initial value)
PCI IRQ Configuration Sets PCI IRQs for the PCI slots. Press the [Enter] key to display the [PCI IRQ
Configuration] submenu window.
PCI IRQ Line 1–8 Auto (Fixed parameter) Sets the PCI IRQ.
Item Specific Help
Change Values-/+
F7
Select Item
Select Menu
Select Sub-MenuEnter
F1
Esc
Help
Exit
F9
Mod. Defaults
Previous Values
Advanced Security Server ExitMain
Setup items for
configuring the
specific PCI device.
PCI Configuration
PCI SLOTS Configuration:
PCI IRQ Configuration:

Fujitsu primergy TX150 Specifications

General

Brand	Fujitsu
Model	primergy TX150
Category	Server
Language	English