23. SETTINGS MENU
23-3
23.3 File Import
The [File Import] page lets you import FMD-3xx0 series created setting data, routes/
user charts, and playback data*, from a USB flash memory.
.*Disable AMS to enable import.
Note 1: Item 2 does not appear until after a file is selected. Item 3 appears after the
data to import is selected.
Note 2: The message "Now processing" appears during the importing, and the mes-
sage "File import finished." appears upon completion. Click the [OK] button.
Note 3: The larger the log data the more the time required to import the data.
Note 4: The system automatically restarts after setting data is imported.
Note 5: If importing could not be completed, first check if the USB flash memory is
properly inserted. If inserted properly, try importing again.
No. Name Description
1 Select file to import
button
Click to show the [OPEN FILE] dialog box, where you can
select the file to import.
2 Data selection Check the data to import setting data, route/user chart, and
playback data.
3 [Import] button Click to import the ob-
jects selected. The mes-
sage shown right
appears.
Playback data
Following data will be replaced with the imported
data, and system will reboot automatically.
Please export current data before import if needed.
- Setting data
- Route/User chart
Do you wish to continue?
To Next Page
Loading...
Need help?
General
