EasyManuals Logo
Home>Furuno>Marine Equipment>FMD-3300

Furuno FMD-3300 User Manual

Furuno FMD-3300
508 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
3. HOW TO MANAGE CHARTS
3-15
6. Select the USB flash memory, then click the [Save] button to save the order file to
the USB flash memory.
7. Send the order file to updates@c-map.com.
Within a few minutes you will receive a file that includes the terms for using the chart
service and the chart updates. Save the file to a USB flash memory and apply it as
shown in the next section.
How to apply the update file
1. Insert the USB flash memory that contains the update file (.ans extension) into the
USB port on the Control Unit.
2. Get into the Chart maintenance mode then click the [License] button on the
InstantAccess bar
â„¢
.
3. Click the [C-MAP] tab to show the [Licenses] dialog box for C-MAP.
4. Click the [Update from File] button.
5. Find the update file on the USB flash memory then click the [Open] button.
Note: If the .ans file does not update the status of all shared C-MAP DL charts, reset
the power of all processor units.
3.8.2 How to enable and set up the C-MAP DL
1. Get into the Chart maintenance mode then click the [License] button on the
InstantAccess bar
â„¢
.
2. Click the [C-MAP DL] tab to show the [Licenses] dialog box for C-MAP DL.
3. Check [Enable Dynamic License] to enable the dynamic licensing.
You now have access to all the charts contained within the selected subscription
zones - both already licensed charts and new charts.
Settings, indications on the Licenses dialog box for C-MAP DL
• Set your annual credit limit with [Credit Limit]. A permanent warning is given if your
credit goes below this value. A new chart cannot be enabled if it causes the credit
to go below this value.
• [Credit Rest] shows the amount of credit remaining and is updated each time you
receive a confirmation answer for your request via e-mail.
• [Next Report Date] is the date when the next report should be sent to C-MAP. If
charts are not reported before the mandatory report date, access to all non-reported
charts is discontinued and can be resumed only after the confirmation answer al-
lowing use of the charts is received via e-mail.
C1210011 ENC 01 Jun 2012 Unissued

Table of Contents

Other manuals for Furuno FMD-3300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Furuno FMD-3300 and is the answer not in the manual?

Furuno FMD-3300 Specifications

General IconGeneral
BrandFuruno
ModelFMD-3300
CategoryMarine Equipment
LanguageEnglish

Related product manuals