Furuno FMD-3300 User Manual

2. OPERATIONAL OVERVIEW
2-32
2.11.4 Check configuration of navigation sensors
You can check the configuration of your navigation sensors in the [System Sensor
Settings] page and [Local System Settings] page in the [Sensor] menu.
Check speed settings ([SPD] page)
Open the menu and click the [SPD] tab in the [System Sensor Settings] page or [Local
System Settings] page. The user can select navigation sensors for use in navigation
and view their current values.
If there is no value shown for a sensor, this means that the sensor is not valid. Note
that the content of these pages depends on the sensors that are in use on the ship.
The content of the display changes with sensor.
Note that manual speed should only be used in an emergency, when no other speed
reference is available. Remember that position sensors are also available as speed
sources.
SPD page, local sensor
SPD page, system sensor

Furuno FMD-3300 Specifications

General

Brand	Furuno
Model	FMD-3300
Category	Marine Equipment
Language	English