To Next Page

To Previous Page

4–10 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL

CHAPTER 4: INTERFACES

4.2 EnerVista 469 Setup Software Interface

4.2.1 Overview

The front panel provides local operator interface with a liquid crystal display. The EnerVista

469 Setup software provides a graphical user interface (GUI) as one of two human

interfaces to a 469 device. The alternate human interface is implemented via the device's

faceplate keypad and display (see the first section in this chapter).

The EnerVista 469 Setup software provides a single facility to configure, monitor, maintain,

and trouble-shoot the operation of relay functions, connected over serial communication

networks. It can be used while disconnected (i.e. off-line) or connected (i.e. on-line) to a 469

device. In off-line mode, Settings files can be created for eventual downloading to the

device. In on-line mode, you can communicate with the device in real-time.

This no-charge software, provided with every 469 relay, can be run from any computer

supporting Microsoft Windows

95 or higher. This chapter provides a summary of the

basic EnerVista 469 Setup software interface features. The EnerVista 469 Setup help file

provides details for getting started and using the software interface.

With the EnerVista 469 Setup running on your PC, it is possible to

• Program and modify settings

• Load/save Settings files from/to disk

• Read actual values and monitor status

• Perform waveform capture and log data

• Plot, print, and view trending graphs of selected actual values

• Download and playback waveforms

• Get help on any topic

GE 469 User Manual

Other manuals for GE 469