GE 469 User Manual

CHAPTER 4: INTERFACES
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL 4–9
4.1.9 Flash Messages
Flash messages are warning, error, or general information messages displayed in response
to certain key presses. The length of time these messages remain displayed can be
programmed in
S1 RELAY SETUP ZV PREFERENCES ZV DEFAULT MESSAGE CYCLE TIME. The
factory default flash message time is 4 seconds. For additional information and a complete
list of flash messages, refer to Flash Messages on page 6–38.
Relay Not Configured
Consult User Manual
Minor
This warning occurs when the 469 CT Primary or
FLA is set to “None”.
Service Required
Schedule Maintenance
Minor
Caused by a failure of the real time clock circuit.
The ability of the relay to maintain the current
date and time is lost.
Table 4–1: Self-Test Warnings
Message Severity Failure description

GE 469 Specifications

General

Brand	GE
Model	469
Category	Relays
Language	English