GE HEALTHCARE
D
IRECTION 5305880-100, REVISION 3 LOGIQ™ 100 PRO SERVICE MANUAL
Chapter 6 - Service Adjustments Page 6-1
Chapter 6 Service Adjustments
Section 6-1 Overview
6-1-1 Service Adjustments Available in LOGIQ™ 100 PRO
The LOGIQ™ 100 PRO does not contain service adjustable parts. In case of failure of any module
like the Power Supply, HV pcb it is recommended to replace the power supply unit instead of trying
to adjust the potentiometer or replacing the fuse.
No Service Adjustments.
WARNING DO NOT ADJUST CRT POTENTIOMETERS.
WARNING Whenever Upgrade of LOGIQ™ 100 PRO is done at field, Please ensure patient data back up is
done before upgrading the machine.
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.
See the GEHC Myworkshop System to determine the status of this document.
Approved Document - 5305880-100TPH_r3.pdf Page 104 of 197