GE HEALTHCARE
D
IRECTION 5305880-100, REVISION 3 LOGIQ™ 100 PRO SERVICE MANUAL
Chapter 8 - Replacement Procedures Page 8-1
Chapter 8 Replacement Procedures
Section 8-1 Overview
8-1-1 Purpose of Chapter 8
This chapter holds replacement procedures for the following modules/subsystems.
CONTENTS IN CHAPTER 8
Section Description
Page
Number
8-1 Overview 8-1
8-2 Top Cover (FRU 101) 8-2
8-3 KEYBOARD (FRU 201) 8-4
8-4 FRONT PANEL/MONITOR (FRU 401/501) 8-10
8-5 PCBs 8-14
8-5-1 Disassembly/Assembly of Davinci Board. (FRU 601/603/604/1433) 8-14
8-5-2 Disassembly/Assembly of FEB for LOGIQ™ 100 PRO (FRU 703) 8-18
8-6 Fan Assembly (FRU 901) 8-20
8-7 Power Supply/Distributor PCB (FRU 801/802) 8-21
8-8 Rear Panel (FRU 1001) 8-21
8-9 HV Assembly (FRU 1101) 8-24
8-10 Chassis (FRU 1201) 8-25
Table 8-1 Contents in Chapter 8
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.
See the GEHC Myworkshop System to determine the status of this document.
Approved Document - 5305880-100TPH_r3.pdf Page 130 of 197
To Next Page
Loading...
Need help?
General
