GE HEALTHCARE
D
IRECTION 5305880-100, REVISION 3 LOGIQ™ 100 PRO SERVICE MANUAL
Chapter 2 - Pre Installation Page 2-1
Chapter 2 Pre Installation
Section 2-1Overview
2-1-1 Purpose of Chapter 2
This chapter provides the information required to plan and prepare for the installation of a
LOGIQ™ 100 PRO. Included are descriptions of the facility and electrical needs to be met by the
purchaser of the unit. A checklist is also provided at the end of this section to help determine
whether the proper planning and preparation is accomplished before the actual equipment
installation is scheduled.
CONTENTS IN CHAPTER 2
Section 2-2 General Console Requirements
2-2-1 Console Environmental Requirements
Section Description Page Number
2-1 Overview 2-1
2-2 General Console Requirements 2-1
Table 2-1 Contents in Chapter 2
Operating temperature:
10 to 40
o
C
Storage temperature:
-10 to 60
o
C
Humidity: 30% to 75% rH non-condensing
Table 2-2 Environmental Specifications for LOGIQ™ 100 PRO Scanners
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.
See the GEHC Myworkshop System to determine the status of this document.
Approved Document - 5305880-100TPH_r3.pdf Page 40 of 197
To Next Page
Loading...
Need help?
General
