System Configuration
LOGIQ e – Basic Service Manual 3-31
5461614-100 English Rev. 6
Software Options configuration
Software Option installation introduction
Refer to the LOGIQ e Basic User Manual, Chapter 16,
Customizing Your System for information on configuring items
like Hospital, Department, Language, Units (of measure), Date,
Time and Date Format.
For information on configuring Software Options, Refer to the
LOGIQ e Basic User Manual, Chapter 16, Customizing Your
System.
For information on configuring DICOM Connectivity, Refer to the
LOGIQ e Basic User Manual, Chapter 16, Customizing Your
System.
Connectivity setup
To be able to use the network functions when connected to a
hospital network, the scanner must have a proper network
address.
• Before you can set up the scanner, you need to collect some
information.
• The Worksheet can be used for gathering this information.
• Typical source for this information is the network
administrator.
To Next Page
Loading...
Need help?
General
