General procedures
LOGIQ e – Basic Service Manual 4-13
5461614-100 English Rev. 6
Removable media
Refer to the latest revision of the User Manual to perform the
following tasks:
• Using Removable Media
• Labeling Removable Media
• Formatting Removable Media
• Verifying Removable Media
Archiving and loading presets
NOTE: Always save presets before any software reload. This ensures
the presets loaded after the software reload are as up–to–date
as possible.
All user presets except changes to Summary, Anatomy, and
Biometry pages, can be saved on an DVD-R disk (or USB
memory device, SD Card) for reloading on the system.
NOTE: Presets should NOT be saved on the same DVD-R disk (or USB
memory device, SD Card) as images. The Archive Menu lists
the images but does NOT list the presets stored on a DVD-R
disk (or USB memory device, SD Card).
Archiving Presets to an DVD-R Disk (or USB memory device, SD Card)
1. Insert an empty (blank) DVD-R disk into the DVD-RW.
2. Access to the Utility/Config Menu, and select System. The
Backup sheet will be shown on the LCD display.
Figure 4-6. Backup Sheet
To Next Page
Loading...
Need help?
General
