System Setup
3-10 LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
Unpacking the LOGIQ e (continued)
NOTE: Check the shipping container for special instructions. Verify that
the container is intact. In some cases a secondary container
may be used. If so, ask the carrier for unpacking instructions.
Figure 3-4. Labels on Package
Moving into Position
In general, a single adult can move the LOGIQ e. Before
moving, store all loose parts in original accessory box or in back
pack. Return probes to original box.
Packing the Equipment
Please pack LOGIQ e in the reverse order of unpacking.
CAUTION
Please carefully unpack the system, and do not dispose the
package of LOGIQ e, so that it can be reused for service.
CAUTION
Do not lift the unit by the rubber band. Use handle to move
system.
CAUTION
Equipment Damage Possibility. Lifting the console by holding
covers may damage the covers. Do not lift the console by
holding any covers.